VPN Client 'Domain' field - ASA/ACS authentication
We have a VPN concentrator 3000 in place now that does not prompt users for a domain entry just the user/pass. We have a ASA installed that when we connect we have the user/pass and now domain field as well. How do I tell it to use a default domain on the backend for all user/pass combinations? I have set the default domain in the policy for the ipsec client profile but as I understand that only affects dns resolution? The ASA is running 8 and ACS is 3.3. The NAS is setup as a radius client just as the vpn concentrator is. Any help is appreciated.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...