Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

VPN client --> router fw feature set

Is it possible to terminate the cisco vpn client software to a 2600 3600 series router as you do with pix or VPN concentrator.

I was told today you could do it with a 12.2 release is this correct.

If so a link would be great.

Thanks

Allan

4 REPLIES
Community Member

Re: VPN client --> router fw feature set

Hi,

As long as your router IOS supports firewall feature set should be able to do it. It's not required to use 12.2 release.

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800949db.shtml

-Jimmy

Community Member

Re: VPN client --> router fw feature set

I think you need images with "Easy VPN server" feature, I think it exists in images > 12.2(8)T

Regards,

John

Cisco Employee

Re: VPN client --> router fw feature set

This is correct, 12.2(8)T and above will support the Cisco VPN client connections. You don't need the firewall feature set, you will need DES/3DES feature set though.

Sample config is here:

http://www.cisco.com/warp/public/480/ipsec-ios-tacacs.html

This uses TACACS for user authentication, for local authen just change:

> aaa authentication login userauthen group tacacs+

to:

> aaa authentication login userauthen local

and add as many :

> username password

lines as you need

Community Member

Re: VPN client --> router fw feature set

Thats good thankyou very much.

159
Views
4
Helpful
4
Replies
CreatePlease to create content