11-23-2006 08:03 AM - edited 02-21-2020 02:44 PM
Hi,
I use cisco vpn client with a 7206VXR.
I have configured an ''ip local pool'' which gives us ip address for each connected client.
The pool is configured like this:
ip local pool Pool-Z 10.3.1.1 10.3.1.254
and we use it like that:
crypto isakmp client configuration group ZORGLUB
key AKEY
pool Pool-Z
acl ACL-Z
The problem I have is that we receive an ip with a /8 mask but the mask I want to use should be /16.
Where can I specify the network mask ?
Thanks,
Solved! Go to Solution.
11-23-2006 08:44 AM
Hi Benoit
You need specify NETMASK under client configuration group
crypto isakmp client configuration group ZORGLUB
key AKEY
pool Pool-Z
acl ACL-Z
netmask 255.255.0.0
M.
Hope that helps rate if it
11-23-2006 08:44 AM
Hi Benoit
You need specify NETMASK under client configuration group
crypto isakmp client configuration group ZORGLUB
key AKEY
pool Pool-Z
acl ACL-Z
netmask 255.255.0.0
M.
Hope that helps rate if it
11-26-2006 09:32 AM
Thanks m.sir, this sub-command (netmask) doesn't exists for the IOS I use (12.3.10e on 7206VXR) but it exists on our 2851 so...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: