Does anyone know...if it's possible, using one of the Pix series firewalls to create both a lan-to-lan tunnel as well as accept incoming VPN requests from the Cisco Secure VPN Client?
Right now we have a Pix 506 (in a remote office) creating a L2L tunnel with a 3005 concentrator (main site). We'd like to give the folks in that remote office the ability to connect, using the VPN Client, directly to their office's 506 (thus their mail server, etc) rather than having to come through the main concentrator and then back out the concentrator again through the L2L.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...