Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VPN Client Problem.

Hi all,

I need support.

I use Cisco Vpn Client Ver.4.06, I select "Allow local LAN Access" but only traffic directed to remote LAN is permitted.

Ho to improve split-tunnell?

Where can I find any example?

Tks all.

2 REPLIES

Re: VPN Client Problem.

Hello

Well the split tunneling option is usually configured on the VPN termination device is PIX or concentrator where the policy is pushed to the vpn client. Usually when setting up the split tunneling option you will have an access-lists matching destinations to be encrypted defined if it's not defined all traffic is encypted and sent to the vpn endpoint.

PIX Example:

LAN 192.168.1.0 255.255.255.0

vpngroup vpn-group split-tunnel vpn-group_splitTunnelAcl

access-list vpn-group_splitTunnelAcl permit ip 192.168.0.0 255.255.255.0 any

So if you have control of that then you should be able to change the vpn policy.

Patrick

Gold

Re: VPN Client Problem.

spilt tunneling needs to be configured on the vpn server.

please advise what sort of device it is for further assistance.

96
Views
0
Helpful
2
Replies