which is configured for remote access vpn(dynamic crypto map)
In the other side is a software cisco vpn client (v4.0.5(Rel) on a XP sp2 machine.
When I try to connect to the PIX via the vpn client after a succesfull authentication my Pc is rebooting.
I tried to debug the problem on the cisco side (debug crypto ipsec debug crypto isakmp debug crypto engine) but everything looks good..IKE phase 1,2 completed successfully, ike sa and ipsec sa is created...
I also tried to change the vpn client to v4.8, or to connect from another PC but no success.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...