03-05-2003 06:07 PM - edited 02-21-2020 12:23 PM
I have the above box check on the VPN Client software (Ver 3.5.1) but when I connect I am unable to access anything on my network and when I look at the general tab, the client software says that Local LAN access is disabled. Any ideas on how I can fix this?
Thanks
03-07-2003 02:41 PM
Hi,
This feature needs to be configured on the Headend(VPN3000) side first, go to :
Configuration->User Mgmt->Group Mgmt->Modify Group->Client Config tab, and then configure:
Tunnel everything (Select this radio button)
Allow the networks in list to bypass the tunnel (check this box)
and then under "Split Tunneling Network List", select :
VPN Client Local LAN (Default)
and reconnect your client, it should work.
Thx
Afaq
03-11-2003 03:36 PM
Hello Afaq,
I actually do have the same problem but with PIX525 as headend. The VPN user cannot access the print server on his local LAN while connected to the PIX acting as VPN gateway. What is the PIX equivalent of "split-tunnel access list" for the "VPN Client Local LAN"?
Best regards,
Witold Kucinski, CCNP
03-11-2003 07:38 PM
> vpngroup
Example is here:
http://www.cisco.com/warp/public/110/pixcryaaa52.shtml#xauthwithvpngroups
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: