Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN client resolution

i'm running on PIX6.2 firewall with VPN services running for remote VPN client.

My internal LAN DNS server is 192.168.1.1/24,all my internal LAN PCs 192.168.1.0/24,

VPN IP Pool 192.168.2.1/24.The problem lies here,once connected my vpn client was able to

ping to the internal IP workstations but unfortunately they were unable to ping thru the name.

My assumption will be on DNS problem.I had allocated the 192.168.1.1 DNS server to my IP local

Pool clients and was able to ping the server but not the name.Any advise or routing need to be

done on the firewall,infact on my DNS server setting I had made run on 2 segments

192.168.0.0/24 & 192.168.1.0/24.I have tested on changing my VPN IP Pool to be the same as 192.168.0.0/24 as my internal LAN and it just work but unfortunately this is not the setting I wish for.

1 REPLY
New Member

Re: VPN client resolution

Sorry wrong infor on the bottom line,should I said I had made 2 segemnts run on DNS server 192.168.1.0/24 & 192.168.2.0/24 and tried out on changing to IP localPool 192.168.1.0/24 same as internal LAN and it works but unfortunately this is not the setting I wish for.

146
Views
0
Helpful
1
Replies
CreatePlease to create content