Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

VPN Client to PIX 515 Basic Configuration

I have a been having trouble configuring the PIX to VPN Client. Can some one explain to me the basic VPN Setup, Using 6.1(3) software release. I have tried the cisco examples and Still can not get it to work.

Thanks.

2 REPLIES
Cisco Employee

Re: VPN Client to PIX 515 Basic Configuration

what client are you using ???

there are some very good sample configs on CCO, here is the link

http://www.cisco.com/warp/public/707/index.shtml#ipsec

scroll down to

IPSec PIX to Cisco Secure VPN Client

IPSec PIX to VPN 3000 Client

Use the sample config as a template and if it still doesn't work, post a query here again with more details.

HTH

R/Yusuf

New Member

Re: VPN Client to PIX 515 Basic Configuration

Basic PPTP VPN configuration on the PIX, it will work with nat as well.

ip local pool vpnpool 10.0.1.1-10.0.1.254

sysopt connection permit-pptp

vpdn group 1 accept dialin pptp

vpdn group 1 ppp authentication pap

vpdn group 1 ppp authentication chap

vpdn group 1 ppp authentication mschap

vpdn group 1 ppp encryption mppe 40

vpdn group 1 client configuration address local vpnpool

vpdn group 1 client configuration dns 10.0.1.237

vpdn group 1 client configuration wins 10.0.1.237

vpdn group 1 pptp echo 60

vpdn group 1 client authentication local

vpdn username pptp-Username password pwd

vpdn enable outside

You can also add a Radius server for authentication. This is the minimum config for a PPTP connection VPN.

http://www.cisco.com/warp/public/110/pptppix.html

Hope this helps.

Michael

103
Views
0
Helpful
2
Replies
CreatePlease to create content