VPN Client Trouble...

[pmcallion]

Hi,

I have a Cisco 1803 SDSL router which is connected to a SDSL connection.

I am using the router to terminate VPN clients.

If I apply my crypto map to the dialer interface my VPN clients can connect OK and route to the local lan without any problems.

If I apply my crypto map to my vlan 2 interface which is configured to use my assigned IP's from my ISP currently a /29 block my VPN clients can connect OK but cannot route to the local lan or any other interface on the router apart from the IP (Vlan 2 Interface) which terminates the clients.

I have the default route set to the dialer interface.

If I add a static route for the pool of IP's which get assigned to the VPN Clients to route to vlan2 I can ping the local lan but get loads of packet loss.

If you need any more info to assist me please let me know

Thanks

Paul

[pmcallion]

Sorry,

Config Attached

[spremkumar · Accepted solution]

Hi Paul

Can you try the below command and check ?

crypto map crypto-map local-address Vlan2

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tsec_r/sec_c3ht.htm#wp1264087

regds

[pmcallion]

Thanks a Million,

Resolved my problem a treat.

Between me and you, I opened a TAC and they couldn't resolve ;-)