Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN Client Trouble...

Hi,

I have a Cisco 1803 SDSL router which is connected to a SDSL connection.

I am using the router to terminate VPN clients.

If I apply my crypto map to the dialer interface my VPN clients can connect OK and route to the local lan without any problems.

If I apply my crypto map to my vlan 2 interface which is configured to use my assigned IP's from my ISP currently a /29 block my VPN clients can connect OK but cannot route to the local lan or any other interface on the router apart from the IP (Vlan 2 Interface) which terminates the clients.

I have the default route set to the dialer interface.

If I add a static route for the pool of IP's which get assigned to the VPN Clients to route to vlan2 I can ping the local lan but get loads of packet loss.

If you need any more info to assist me please let me know

Thanks

Paul

1 ACCEPTED SOLUTION

Accepted Solutions

Re: VPN Client Trouble...

Hi Paul

Can you try the below command and check ?

crypto map crypto-map local-address Vlan2

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tsec_r/sec_c3ht.htm#wp1264087

regds

3 REPLIES
New Member

Re: VPN Client Trouble...

Sorry,

Config Attached

Re: VPN Client Trouble...

Hi Paul

Can you try the below command and check ?

crypto map crypto-map local-address Vlan2

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tsec_r/sec_c3ht.htm#wp1264087

regds

New Member

Re: VPN Client Trouble...

Thanks a Million,

Resolved my problem a treat.

Between me and you, I opened a TAC and they couldn't resolve ;-)

113
Views
0
Helpful
3
Replies
CreatePlease login to create content