Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

VPN Client will not browse when connected via 877w

Hi,

I have set up a Cisco 877w and it works fine for web access

VPN Client on my laptop connects through the 877w and authenticates to my remote work ASA5510 firewall.

Problem is after connecting to the ASA I cannot connect to anything to the internal work network (10.0.0.0/24), ping, RDP etc comes back with no response.

I have attached the config, can anyone tell me what I am missing, an access list maybe?

Thanks for your help

Chris

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: VPN Client will not browse when connected via 877w

This router is doing PAT/NAT , blocking Ipsec.

Enable Nat traversal on the remote ASA.

isakmp nat-t or crypto isakmp nat-t

HTH

Saju

Pls rate helpful posts

3 REPLIES
Silver

Re: VPN Client will not browse when connected via 877w

This router is doing PAT/NAT , blocking Ipsec.

Enable Nat traversal on the remote ASA.

isakmp nat-t or crypto isakmp nat-t

HTH

Saju

Pls rate helpful posts

Community Member

Re: VPN Client will not browse when connected via 877w

Config attached

Community Member

Re: VPN Client will not browse when connected via 877w

Fixed the issue, Many Thanks

117
Views
0
Helpful
3
Replies
CreatePlease to create content