Re: VPN clients (3.5) connecting to a VPN 3030 cannot use the In
There is no other way.
Please make sure you created a network list, for example, just define the private subnet of the concentrator. Then on the group you use , apply the network list for split tunnel. Then make sure if you are already connected, to disconnect and reconnect.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...