Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
New Member

VPN clients can only see DHCPed IPs inside

We are running a PIX 501 (6.3)

We have it set up as a firewall/vpn router on a DSL modem.

We have several computer on the inside interface, IP range

The PIX is set to give out DHCP address from to .33

If the PIXs gives a computer an IP via DHCP outside VPN clients can contact it. If the computer self assigns its IP, either in the DHCP range or outside it, none of the VPN Clients can get to it.

This is Bad. I have several servers that need to be VPN accessible, and can not put them on DHCP and have their IPs change constantly.

Please help, I'm pulling my hair out.

Here is my config:

PIX Version 6.3(5)

interface ethernet0 100full

interface ethernet1 100full

nameif ethernet0 outside security0

nameif ethernet1 inside security100

enable password XXXXXXX encrypted

passwd XXXXXXX encrypted

hostname XXXX

domain-name xxxxx

fixup protocol dns maximum-length 512

fixup protocol ftp 21

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol http 80

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol sip 5060

fixup protocol sip udp 5060

fixup protocol skinny 2000

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol tftp 69


access-list nonat permit ip

access-list outside_cryptomap_dyn_20 permit icmp any any

access-list outside_cryptomap_dyn_20 permit ip

pager lines 24

mtu outside 1500

mtu inside 1500

ip address outside pppoe setroute

ip address inside

ip audit info action alarm

ip audit attack action alarm

ip local pool ippool

pdm location inside

pdm location outside

pdm location inside

pdm location inside

pdm logging informational 100

pdm history enable

arp timeout 14400

global (outside) 1 interface

nat (inside) 0 access-list nonat

nat (inside) 1 0 0

timeout xlate 0:05:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00

timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00

timeout sip-disconnect 0:02:00 sip-invite 0:03:00

timeout uauth 0:05:00 absolute

aaa-server TACACS+ protocol tacacs+

aaa-server TACACS+ max-failed-attempts 3

aaa-server TACACS+ deadtime 10

aaa-server RADIUS protocol radius

aaa-server RADIUS max-failed-attempts 3

aaa-server RADIUS deadtime 10

aaa-server LOCAL protocol local

http server enable

http inside

no snmp-server location

no snmp-server contact

snmp-server community public

no snmp-server enable traps

floodguard enable

sysopt connection permit-ipsec

crypto ipsec transform-set ESP-3DES-sha esp-aes-256 esp-sha-hmac

crypto dynamic-map dynmap 20 set transform-set ESP-3DES-sha

crypto map outside_map 500 ipsec-isakmp dynamic dynmap

crypto map outside_map interface outside

isakmp enable outside

isakmp nat-traversal 20

isakmp policy 20 authentication pre-share

isakmp policy 20 encryption aes-256

isakmp policy 20 hash sha

isakmp policy 20 group 2

isakmp policy 20 lifetime 86400

vpngroup maxhrvpn address-pool ippool

vpngroup maxhrvpn dns-server

vpngroup maxhrvpn split-tunnel outside_cryptomap_dyn_20

vpngroup maxhrvpn idle-time 1800

vpngroup maxhrvpn password ********

telnet inside

telnet timeout 5

ssh inside

ssh timeout 5

management-access inside

console timeout 0

vpdn group pppoex request dialout pppoe

vpdn group pppoex localname

vpdn group pppoex ppp authentication pap

vpdn username xxxxxxx password *********

dhcpd address inside

dhcpd dns

dhcpd lease 3600

dhcpd ping_timeout 750

dhcpd auto_config outside

dhcpd enable inside

terminal width 80


Re: VPN clients can only see DHCPed IPs inside


He has a got response everywhere :)

That's the good thing about this forum. People willing to help out others.




Re: VPN clients can only see DHCPed IPs inside

More points for us! Since we both are right, I'll rate yours and you can rate mine.

CreatePlease to create content