Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN Clients Only See Directly Conencted Network

Hello - I have a Pix 515 that I am using for VPN. Everything works, except once connected, the clients (172.16.3.0) can only see the directly connected network (192.168.2.0), and not any of our other subnets. Whats missing?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: VPN Clients Only See Directly Conencted Network

Andy,

The ASA inside IP Subnet is 192.168.2.0/24 - but you do not have routes to indicate any other subnets of the 192.168.0.0/16 exist. if you have more subnets on the inside network, then you need to let eh ASA know about them eg:-

route inside 192.168.1.0 255.255.255.0 <>

You should also decided if you are going to tunnel all traffic, or split-tunnel.

HTH>

1 REPLY

Re: VPN Clients Only See Directly Conencted Network

Andy,

The ASA inside IP Subnet is 192.168.2.0/24 - but you do not have routes to indicate any other subnets of the 192.168.0.0/16 exist. if you have more subnets on the inside network, then you need to let eh ASA know about them eg:-

route inside 192.168.1.0 255.255.255.0 <>

You should also decided if you are going to tunnel all traffic, or split-tunnel.

HTH>

113
Views
0
Helpful
1
Replies