08-04-2008 05:35 AM - edited 02-21-2020 03:52 PM
Hello - I have a Pix 515 that I am using for VPN. Everything works, except once connected, the clients (172.16.3.0) can only see the directly connected network (192.168.2.0), and not any of our other subnets. Whats missing?
Solved! Go to Solution.
08-04-2008 06:03 AM
Andy,
The ASA inside IP Subnet is 192.168.2.0/24 - but you do not have routes to indicate any other subnets of the 192.168.0.0/16 exist. if you have more subnets on the inside network, then you need to let eh ASA know about them eg:-
route inside 192.168.1.0 255.255.255.0 <
You should also decided if you are going to tunnel all traffic, or split-tunnel.
HTH>
08-04-2008 06:03 AM
Andy,
The ASA inside IP Subnet is 192.168.2.0/24 - but you do not have routes to indicate any other subnets of the 192.168.0.0/16 exist. if you have more subnets on the inside network, then you need to let eh ASA know about them eg:-
route inside 192.168.1.0 255.255.255.0 <
You should also decided if you are going to tunnel all traffic, or split-tunnel.
HTH>
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide