Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN Concentrator-Client Connectivity

I have this user >wink< whom is intermittently connecting by vpn client (3.6) to a 3005 Concentrator (3.6). He has a broadband connection but keeps getting "terminated by remote peer" messages.

To further make it interesting last night I was able to login with his credentials on another broadband conection without a problem in between him not being able to.

Suggestions to look at?

>vpn client log below<

1 21:23:27.358 09/02/03 Sev=Warning/3 IKE/0xE300006F

Cannot match Policy Entry:

local host=IP ADDR=0.0.0.0, lcl_port = 0

remote host=IP ADDR=0.0.0.0, dst_port = 0

2 21:23:27.358 09/02/03 Sev=Warning/3 IKE/0xA3000001

Failed to initiate negotiation.

3 21:23:27.358 09/02/03 Sev=Warning/3 IKE/0xE3000002

Function initialize_qm failed with an error code of 0x00000000(INITIATE:811)

4 21:23:35.358 09/02/03 Sev=Warning/3 IKE/0xA3000057

Received malformed message or negotiation no longer active (message id: 0x8DB8A930)

5 21:23:43.358 09/02/03 Sev=Warning/3 IKE/0xA3000057

Received malformed message or negotiation no longer active (message id: 0x8DB8A930)

6 21:23:51.358 09/02/03 Sev=Warning/3 IKE/0xA3000057

Received malformed message or negotiation no longer active (message id: 0x8DB8A930)

7 21:24:03.796 09/02/03 Sev=Warning/3 DIALER/0xE3300015

GI VPN start callback failed "CM_IKE_RECEIVED_DELETE_NOTIFICATION" (15h).

1 REPLY
Silver

Re: VPN Concentrator-Client Connectivity

The following seems to be a matching a bug ID CSCdx88008 if you are using W2K/XP,

21:23:27.358 09/02/03 Sev=Warning/3 IKE/0xE300006F

Cannot match Policy Entry:

local host=IP ADDR=0.0.0.0, lcl_port = 0

remote host=IP ADDR=0.0.0.0, dst_port = 0

Try changing the group password first.

98
Views
0
Helpful
1
Replies
CreatePlease login to create content