VPN concentrator using SDI for authentication - and IP addressing
I have setup SDI authentication on the VPN concentrator and it works perfectly - but I want it such that when a user is authenticated from the SDI server it then goes back to the concentrator and gives the user a specific IP...not from a pool.
Re: VPN concentrator using SDI for authentication - and IP addre
Someone correct me if I am wrong, but I think your requirement is not possible to achieve. Except may be you can enable the RADIUS option on the SDI and create an attribute for an IP address to be passed to the authenticated user. This should be easy to do with a RADIUS server . You may consider using a RADIUS server + SDI server.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...