10-31-2006 06:15 AM - edited 02-21-2020 02:41 PM
Hi All,
I need to configure a VPN on PIX !
Can someone help me to configure all the step that i can do for VPN on PIX ( any one ) with client ON windows XP ?? I want to create a general roule fo configuration. Tanks for all
Natale
10-31-2006 06:18 PM
Natale,
Depending upon the version you are running on the Pix, please refer the below URL(s) that has the configuration details:
Configuring Cisco Secure PIX Firewall 6.0 and Cisco VPN 3000 Clients Using IPSec
http://cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009442e.shtml
Pix 7.x
http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_70/config/vpnrmote.htm
I hope it helps.
Regards,
Arul
** Please rate all helpful posts **
11-06-2006 01:16 AM
Tanks for all
Plese as possible if I have a nat (insisde )
rule,on my configuration for example
static ( inside, outside) 194.xxx.xxx.xxx 192.xxx.xxx.xxx netmask 255.255.255.255
access-list acl_inside permit ip any host 194.xxx.xxx.xxx
access-group acl_outside in interface outside
static ( dmz, outside) 194.xxx.xxx.xxx. 10.xx.xx.xx netmask 255.255.255.255
access-list acl_outside permit any host 194.xxx.xxx.xxx
access-group acl_outside in interface outside
static ( dmz, outside) 194.xxx.xxx.xxx 10.xx.xx.xx netmask 255.255.255.255
access-list acl_outside permit ip any host 194.xxx.xxx.xxx
if i configure the vpn in example this rule are effected or not I need to config. the vpn in this case o similar.
Tanks for your professional help
Regards
natale
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide