VPN- Easy VPN Hardware Client Connects, but No Traffic
I have a PIX 515E and 501 acting as a hardware client. Several remote location are connected as Easy VPN clients, but one location will connect, but no traffic flows. I switched from network-extension-mode to client-mode and I can connect thru to the other network hosts.
I'm not sure why this PIX 501 one is different. There are no ACLs except what is pulled from the headend.
Re: VPN- Easy VPN Hardware Client Connects, but No Traffic
I think the ACL that was missing on the headend was the problem. I was able to PING the server on the 192.168.0.0 network. I wasn't able to do this before. I'm going to try to connect from the other side tonight.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...