Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN errors when setting up a tunnel to a Checkpoint 4.1 firewall

2646 09/11/2003 19:24:29.140 SEV=5 IKE/68 RPT=4 212.65.63.4

Group [212.65.63.4]

Received non-routine Notify message: Invalid ID info (18)

I get these errors:

2647 09/11/2003 19:24:53.040 SEV=4 IKEDBG/0 RPT=27

QM FSM error (P2 struct &0x3ea8f54, mess id 0x5c53adbb)!

2648 09/11/2003 19:24:53.040 SEV=4 IKEDBG/0 RPT=28

QM FSM history (P2 struct &0x3ea8f54):

[13, 52], [8, 38], [8, 65535], [4, 4]

What do they mean ?

2 REPLIES
Gold

Re: VPN errors when setting up a tunnel to a Checkpoint 4.1 fire

Hello Koen,

You might want to consider reading the following two documents on PIX to Checkpoint configuration for troubleshooting,

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008009420f.shtml

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800ef796.shtml

Hope this helps - Thanks, Jay.

New Member

Re: VPN errors when setting up a tunnel to a Checkpoint 4.1 fire

I noticed that I forgot the point out that the connection is between a VPN 3015 and a CP 4.1 SP5

210
Views
0
Helpful
2
Replies
CreatePlease login to create content