Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

vpn issues

Hi,

I've bought an ASA5505 and I'm setting it up as a firewall and vpn server.

After many tries my vpn client connected to the server, but now i can't access to my 'inside' network either to the internet...

What's wrong with my config?

My router (192.168.1.254) is linked to eth0 and my vpn client (192.168.1.10 - assigned by dhcp) is connected to eth7...

Ps: if you have any suggestion to improve my network security feel free to suggest ^_^

(Sorry but this is the first time that I set-up a vpn, so I'm deeply ignorant about this)

1 ACCEPTED SOLUTION

Accepted Solutions

Re: vpn issues

access-list NO-NAT permit ip any 192.168.10.0 255.255.255.0

nat (inside) 0 access-list NO-NAT

access-list SPLIT-T standard permit 192.168.0.0 255.255.255.0

group-policy Tailoradio attributes

split-tunnel-policy tunnelspecified

split-tunnel-network-list value SPLIT-T

no crypto dynamic-map outside_dyn_map 20 set nat-t-disable

no crypto map inside_map interface inside

no crypto isakmp enable inside

crypto isakmp nat-traversal

4 REPLIES
New Member

Re: vpn issues

This is the right configuration file

Re: vpn issues

access-list NO-NAT permit ip any 192.168.10.0 255.255.255.0

nat (inside) 0 access-list NO-NAT

access-list SPLIT-T standard permit 192.168.0.0 255.255.255.0

group-policy Tailoradio attributes

split-tunnel-policy tunnelspecified

split-tunnel-network-list value SPLIT-T

no crypto dynamic-map outside_dyn_map 20 set nat-t-disable

no crypto map inside_map interface inside

no crypto isakmp enable inside

crypto isakmp nat-traversal

New Member

Re: vpn issues

Perfect, now it's working! ^_^

Is there any way to propagate local lan hostnames to the vpn client?

Re: vpn issues

Nice to hear

You can propagate WINS, and DNS servers for the client.

[Pls RATE if HELPS]

132
Views
5
Helpful
4
Replies
CreatePlease login to create content