Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN migration from ISA server to PIX with certificate

Hi all,

I should migrate my remote client vpn from ISA server to the PIX.

Can somebody help me?

The environment should be migrated using same vpn type (i.e. protocol, clients certificates, etc)

Actual environment:

Ipsec over l2tp vpn;

Clients validated by certificate;

Remote clients windows XP using windows native remote access client;

Each client has its own certificate issued from local windows CA authority that can be univocally revocated;

Thanks in advance.

Efrem

2 REPLIES
Bronze

Re: VPN migration from ISA server to PIX with certificate

You need to follow the below guidelines for the migration to PIX from your existing ISA server

1. Backup your current configuration in some computers or any other source through TFTP server software.

2. Install the latest software like 7.2 or 8.0 in the PIX

3. Copy the configuration using the command copy tftp startup:

4. PIX software will automatically convert it to its own format if some commands are not supported in latest version or else it will throw the error message so that you need to refer the command reference to configure the suitable commands.

New Member

Re: VPN migration from ISA server to PIX with certificate

I think there is a misunderstanding:

actually the VPNs are terminated in the Microsoft ISA server proxy/firewall. I suppose you thought to an orthographic mistake: ISA insted of ASA.

Thanks anyway.... Efrem

110
Views
0
Helpful
2
Replies