I am trying to set up a VPN connection for some auditors to one of my clients, and can't seem to get RDP to work. It appears that the Cisco VPN client is connected, but when I try to connect to a specific machine, I;m told that the machine can't be found.
Ping doesn't respond either. When I launch the VPN client, it group authenticates fine, then radius works fine, and the lock icon closes. After that, however, nothing else seems to work. What do I need to do to sanitize a config. I'm a first-timer.
Which group is in question here? 5*vend0rs? If so, take a look at your VENDOR-SPLIT-TUNNEL acl.
access-list VENDOR-SPLIT-TUNNEL permit ip host 70.168.67.x 192.168.201.0 255.255.255.0
access-list VENDOR-SPLIT-TUNNEL permit ip host 70.168.67.x 192.168.200.0 255.255.255.0
This means that only traffic from the vpn clients to 70.168.67.x would be tunneled over the vpn. The second statement wouldn't really do anything. I think it should look more like your other split tunnel acl.
access-list VENDOR-SPLIT-TUNNEL permit ip 192.168.200.0 255.255.255.0 192.168.201.0 255.255.255.0
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...