Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Vpn Pix1(inside) to Pix2(dmz)

Hi all,

I created a vpn site to site, from inside(192.168.10.0) of pix1 to dmz(192.168.177.0) of pix2, all working well, but i need a communication from 192.168.10.0 to an host 10.0.0.x of the inside of pix2.

i nat the:

static (inside,dmz) 192.168.177.88 10.0.8.88 netmask 255.255.255.255 0 0

but dont work, i had already a full permit acl,

any idea?

Ty in advance

1 REPLY
Green

Re: Vpn Pix1(inside) to Pix2(dmz)

First add this as interesting traffic..

pix 1

access-list permit ip 192.168.10.0 255.255.255.0 host 10.0.0.x

pix 2

access-list permit ip host 10.0.0.x 192.168.10.0 255.255.255.0

Then add to nat 0 acl...

pix 1

access-list permit ip 192.168.10.0 255.255.255.0 host 10.0.0.x

pix 2

access-list permit ip host 10.0.0.x 192.168.10.0 255.255.255.0

nat (inside) 0 access-list

83
Views
0
Helpful
1
Replies
CreatePlease to create content