We allow VPN access in that assigns connections a 10.1.2.x address. Once VPN established, I would like to know how to enable these clients RDP access into 10.5.0.0, 192.168.1.0 and 192.168.2.0 networks. I know its something simple that I am missing. Current PDM version is 2.0.
RDP is Microsoft's Remote Desktop Protocol for Terminal Services similar to Citrix ICA client. I don't think unicast, multicast or snmp would apply. when you connect via Cisco VPN client, you cannot ping addresses across the VPN.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...