I need to know how to enable on a PIX 501, a source initiated VPN session via Cisco VPN client within the inside network through a PIX 501 to the internet and into another PIX 501 on the remote end to the remote internal network. I can establish a VPN session to either PIX 501 sites from the public side of the internet but not from a private-internet-private connection.
Re: VPN session PIX to PIX via Cisco VPN Client V4.7
I added the access-list as suggested above. No luck. The remote PIX 501 that I am accessing via the CISCO VPN client works when I am not behind PIX 501. I am including the configuration from the source site and the log session results.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...