I am relativly new to setting up proper VPNs and so far my experience has been with setting up VPNs off of W2K servers (w/ minimal security).
I need some insight on how to setup a VPN for my PIX 515E firewall. Any information that anyone could provide would be appreciated greatly.
Here is what I plan to do:
-Have employees connect to our W2K network via VPN with dial-up and broadband connections.
-Logon to the network and retirieve email, files from the file server, run limited programs, etc.
- Telnet to a HP-UNIX host via telnet port 23
I was wondering what I need to implement all this. I do not have an AAA server and if possible would like to avoid implementing one if I can. If I cannot avoid it I could use W2K Internet Authroity Service (RADIUS) for the aaa server. Any links or book recomendations on how to implement all this would be great.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...