Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN site2site configuration with private addressing

Hello,

I have to configure a site-to-site VPN between 2 PIX. The first one has a public IP adress on its external interface whereas the second has a private IP.

PIX1-------router1---Internet---router2--------PIX2

(public IP) | (public IP) | (private IP)

Do I need to re-address private addressing between router2 and PIX2 so as I've got a public IP associated with my PIX2's external interface or is there a way to terminate my VPN tunnel on the PIX2 private address ?

thanks for your help

3 REPLIES

Re: VPN site2site configuration with private addressing

Hi,

it's possible to terminate the VPN tunnel on PIX2. Just make sure that router2 forwards UDP/500 (=IKE) and ESP (=IPSEC) from its external interface to the outside interface of the PIX2.

Kind Regards,

Tom

New Member

Re: VPN site2site configuration with private addressing

Hi,

How can I do this ?

I have to translate the outside interface of the PIX2 to a public adress on the router2 ?

Best regards

Gold

Re: VPN site2site configuration with private addressing

Hi -

Here's a good document on PIX-to-PIX VPN Configuration also lots more configuration examples on the 2nd link.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094761.shtml

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/prod_configuration_examples_list.html

Hope this helps - Jay.

121
Views
0
Helpful
3
Replies