Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

vpn through 515 to 501 and use PC Anywhere

hey all,

this is what I have

vpn client 4.0.3 through a 515E to a 501. I want to get to a machine on the inside interface of the 501

I created two ACL's in the 515 to allow any on the inside interface to the public ip of the 501 for esp and isakmp.

With this done, I can connect and login to the 501, get a network address from that network. I want to establish a connection to a server on the inside of the network of the 501 using PC anywhere. Are there any other ports that need to be open beside data and status for PC anywhere. What sort of ACL's, translations, etc will I need to get the connection to work, and on which pix (515e or 501) will I have to make the changes to.

If I connect via a laptop and vpn client from a place other than behind the 515e, i can connect using PC anywhere.

Thanks for your time

Matt

3 REPLIES
New Member

Re: vpn through 515 to 501 and use PC Anywhere

Everything looks fine, any update on thsi ?

New Member

Re: vpn through 515 to 501 and use PC Anywhere

It does not work when I try to connect the remote machine through the 515e. There is a NAT or ACL or something that I am missing.

Thanks

Matt

Anonymous
N/A

Re: vpn through 515 to 501 and use PC Anywhere

PCAnywhere requires tcp 5631 and udp 5632 as defaults.

96
Views
0
Helpful
3
Replies
CreatePlease login to create content