Hi all, I have a Pix 515 that I use for PPTP vpn connections. We allow our branches to do a box to box vpn and they have ip ranges of 192.168.x.x. We also allow remote users to use pptp for a vpn connection. They get their ip address from the local pool of ip addresses from the pix, 192.168.200.x. The pix's internal interface and network are 172.17.x.x.
When connected to a remote vpn session, and getting an ip of 192.168.200.x, I cannot ping any of the 192.168.x.x and 192.168.200.x. I can ping the 172.17.x.x though.
How can I allow 192.168.200.x to communicate with all branches and all other 192.168.200.x ip addresses?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...