Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN Tunnel from Nortel 600 to Cisco 3030

I am trying to establish a VPN tunnel from a Cisco 3030 to Nortel 600

but i am not able to initate traffic from network A to network b, but

from network b to network a...it works fine. However, on Nework B,

there are three networks that network A need access to. Once

the tunnel is established, network a is only able to access one segment

on network b's side.

the goal is to try to access all three network segments from network a

to network b. i have verified and made sure that all three networks

are in the network access-lists.

i am using IKE proposal , esp-md5-hmac, 3des.. and IPsec 3des-preshare,

group 2.

Does anyone else have any idea how to make this work between

the Nortel 600 to Cisco 3030 or Nortell 600 to Cisco 827?

Thank you

Paula

4 REPLIES
Bronze

Re: VPN Tunnel from Nortel 600 to Cisco 3030

Hi

Please make sure that your Network lists are Symmetrical to what you have got on Nortel side, they need to exactly symmetrical.

Thx

Afaq

New Member

Re: VPN Tunnel from Nortel 600 to Cisco 3030

Thank you for your response.

I am confused to what you mean by symmetrical.

Thanks again.

Paula

New Member

Re: VPN Tunnel from Nortel 600 to Cisco 3030

HI Afaq,

Yes I have made sure that the network lists are identical on both boxes.

(pls disregard my previous email).

paula

New Member

Re: VPN Tunnel from Nortel 600 to Cisco 3030

I am facing a similar problem. Were you able to resolve this.

Thanks

122
Views
0
Helpful
4
Replies
CreatePlease login to create content