The problem I have is I'm backing up 2 servers at distant locations and at one of the locations I have a NAS backing each server up, each server has 2 NIC's.
1 NIC is used for normal traffic, and the other is going to be used as the network to go to the backup NAS device which will be on the same network as those NIC's. Now I currently have an ASA5505 at each location running a VPN tunnel from a x.x.x.1 network to a x.x.x.2 network. No problem there. But, the application I'm using to back the servers up requires me to have the servers on the same network. So I need to be able to create a tunnel from where each server is and have that tunnel be on the same network as the NIC's and backup NAS device if that makes any since at all.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...