Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN using Windows Native Client

Is there a way to use the Windows Native VPN Clients in conjunction with ASA 5520's running IOS 8.0? XP and Vista. I would rather use them because I have several custom applcations that are triggering the windows VPN Client. As a workaround I have just enabled passthrough and have the vpn running on another server but I would prefer to have it on the ASA's.

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: VPN using Windows Native Client

Sounds like you want to use L2TP over IPSEC, below is a link on how to configure this on the ASA:-

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807213a7.shtml

HTH.

1 REPLY

Re: VPN using Windows Native Client

Sounds like you want to use L2TP over IPSEC, below is a link on how to configure this on the ASA:-

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807213a7.shtml

HTH.

139
Views
0
Helpful
1
Replies