Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN v4 client IP address from ACS server ??


Can anyone confirm whether or not it is possible for CSACS 3.2 (windows - Radius) to issue an IP address to a VPN client connecting to an IOS router, using dynamic-client profiles based on the logon username.

running debug radius on the NAS I can see that the ACS server is issuing the correct ip address that I have specified for the relevant user back to the NAS - but it doesn't get added to the ISAKMP Client profile.

Due to a complex network setup, I cannot use a pool of addresses on the NAS as would normally be the case.

Incidently, I will need to be able to do this on a PIX also..

I know that I should really be using a CVPN concentrator for this, but the hardware has already been purchased - by someone else...

Thanks in advance.


Re: VPN v4 client IP address from ACS server ??

The PIX or a router would not be able to send configuration parameters to VPN clients per authorization. You would have to have a concentrator to send the IP address to the client.

CreatePlease login to create content