Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Vpn with 827 and Pix 501 and jut s one Public Ip Address

Is it possible to do vpn connections onto the Pix 501(to the inside lan), using the vpn3000 client, when the pix 501 is behind a cisco 827 adsl router and you have just one public IP address on the outside ineterface of the router (given by a the ISP on a french netissimo2 connexion)?

How do i configure the 827 and the Pix 501?

Is it possible to do a static nat and pat?

Thanks

Bruno

1 REPLY
New Member

Re: Vpn with 827 and Pix 501 and jut s one Public Ip Address

No. Not with just one address. You’ll have to get a VPN concentrator and use NAT transparency mode to do that. Otherwise, get another static IP address from your SP and map that to the PIX for your vpn tunnel.

82
Views
0
Helpful
1
Replies