03-25-2007 06:05 PM - edited 02-21-2020 02:56 PM
I have cisco vpn client connecting to a 1721 at the office. the client connects and i can access the office LAN but but not the local LAN. i do have the box checked in vpn client to allow local LAN access. please help!
thanks!
Matt
here's the config:
Current configuration : 3901 bytes
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Cerberus
!
boot system flash c1700-k9o3sy7-mz.122-11.T10.bin
aaa new-model
!
!
aaa group server radius RADIUS-SERVERS
server 192.168.69.1 auth-port 1645 acct-port 1646
!
aaa authentication login LOGIN group RADIUS-SERVERS local
aaa authorization network NETGROUPAUTH local
aaa session-id common
!
username mattheff password 7 07572C4D5A011C034F
username mikeheff password 7 030952000307244A48
clock timezone CST -6
clock summer-time CDT recurring 2 Sun Mar 2:00 1 Sun Nov 2:00
ip subnet-zero
!
!
ip domain name heffnet.net
ip name-server 68.94.156.1
ip name-server 68.94.157.1
ip dhcp excluded-address 192.168.69.1 192.168.69.99
ip dhcp excluded-address 192.168.69.111 192.168.69.254
!
ip dhcp pool HEFFNET_LAN_POOL_1
network 192.168.69.0 255.255.255.0
default-router 192.168.69.254
dns-server 68.94.156.1 68.94.157.1
!
ip audit notify log
ip audit po max-events 100
vpdn enable
!
vpdn-group pppoe
request-dialin
protocol pppoe
!
!
!
crypto isakmp policy 3
encr 3des
authentication pre-share
group 2
!
crypto isakmp client configuration group VPNGROUP
key 8mathef8
dns 68.94.156.1 68.94.157.1
domain heffnet.net
pool VPN_CLIENT_POOL
acl 102
!
!
crypto ipsec transform-set VPNSET1 esp-3des esp-sha-hmac
!
crypto dynamic-map DYNMAP 10
set transform-set VPNSET1
!
!
crypto map VPNCLIENTMAP client authentication list LOGIN
crypto map VPNCLIENTMAP isakmp authorization list NETGROUPAUTH
crypto map VPNCLIENTMAP client configuration address respond
crypto map VPNCLIENTMAP 10 ipsec-isakmp dynamic DYNMAP
!
!
!
!
interface Loopback0
ip address 1.1.1.1 255.255.255.252
!
interface ATM0
description Heffnet WAN/SBC DSL Interface
no ip address
no atm ilmi-keepalive
pvc 0/35
pppoe-client dial-pool-number 69
!
dsl operating-mode auto
no fair-queue
!
interface FastEthernet0
description Heffnet LAN Interface
ip address 192.168.69.254 255.255.255.0
ip nat inside
ip tcp adjust-mss 1452
ip policy route-map VPN_ROUTE_MAP
speed auto
!
interface Dialer69
mtu 1492
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 69
ppp chap hostname cerberus
ppp chap password 7 040306071B29494851
ppp pap sent-username matt_heff@sbcglobal.net password 7 07572C4D5A011C034F
crypto map VPNCLIENTMAP
!
ip local pool VPN_CLIENT_POOL 192.168.70.200 192.168.70.253
ip nat inside source list INTERNAL interface Dialer69 overload
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer69
no ip http server
!
!
ip access-list extended INTERNAL
deny ip 192.168.69.0 0.0.0.255 192.168.70.0 0.0.0.255
permit ip 192.168.69.0 0.0.0.255 any
!
logging 192.168.69.1
access-list 101 permit ip 192.168.69.0 0.0.0.255 192.168.70.0 0.0.0.255
access-list 102 permit ip 192.168.69.0 0.0.0.255 any
!
route-map VPN_ROUTE_MAP permit 10
match ip address 101
set ip next-hop 1.1.1.2
!
alias exec s show ip interface brief
alias exec sr show running-config
!
line con 0
privilege level 15
logging synchronous
line aux 0
privilege level 15
logging synchronous
line vty 0 4
privilege level 15
logging synchronous
line vty 5 15
privilege level 15
logging synchronous
!
scheduler allocate 4000 1000
end
03-26-2007 07:08 AM
Hi Matt,
The config looks good. Please make sure that you get a route for 192.168.69.0 255.255.255.0 network only after connecting with the VPN client. Please also match the 'route print' output of the client before and after connecting. One more thing, I hope that the local network is not 192.168.69.0.
HTH,
Please rate if it helps,
Regards,
Kamal
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: