cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
307
Views
5
Helpful
2
Replies

VPN works but no internet

jweiss
Level 1
Level 1

I think another set of eyes will find my error. I have setup VPN and can connect and access resources on the internal network. However when connected via VPN I can't get out to the internet. Our security policy doesn't allow for split-tunneling so I used the "same-security-traffic permit intra-interface" command and I am pretty sure I got everything else setup right. Can someone please point me where I went wrong, I am really rusty as its been many years since I have worked with cisco products.

Thanks in advance.

Jeremy

2 Replies 2

acomiskey
Level 10
Level 10

nat (outside) 200 192.168.254.0 255.255.255.0 outside

That will do the trick.

Please rate helpful posts.

acomiskey

thanks for pointing me in the right direction. When I first put it in it cut all internet access off from the internal network and from vpn. I ended up having to put the command in this way to get it to work

nat (outside) 200 192.168.254.0 255.255.255.0

and leave the outside off.

Again thanks for pointing me in the right direction.