Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

vpn

any one could advise me the VPN configuration within cisco 1720 with Cisco 3.02 vpn client.

I manage to build up the tunnel but I can't ping to the internal network. please advise.

1 REPLY
Cisco Employee

Re: vpn

Make sure you do an ipconfig /release on your PC, then disconnect and reconnect the vpn tunnel. common issues on this is that the ip address you assign to your client is the same internal ip address you get for your PC thru DHCP on your internal net, thus your local PC NIC would also have an address same as the vpn client connection.

Do a route print on your PC to make sure your VPN client assigned ip is your

default gateway (if you are doing tunnell everything).

Also try to disable fast switching on the interface you have the crypto map on the router. See:http://www.cisco.com/warp/customer/471/ios-unity.html

88
Views
0
Helpful
1
Replies
CreatePlease to create content