Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN3000 DHCP issues

When Users connect to this device they are given a dhcp address in a 172 subnet despite the fact that this concentrator is in a 10.x subnet. The DHCP server, a w2k server, is shared between 2 different VPN's and has dhcp pools for both 172.x and 10.x ranges. Is there a way to force them to get ip's in the correct range?

thanks

Joseph

2 REPLIES
Silver

Re: VPN3000 DHCP issues

Make sure DHCP Relay functionality is enabled on the concentrator and that the DHCP server address is mentioned. Refer URL http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a008014a344.shtml for config example.

New Member

Re: VPN3000 DHCP issues

under config-sys-servers-dhcp my dhcp server is configured and is currently assigning leases to clients that connect. The issue is that clients connecting to this second vpn need to be assigned a 10.x address and they are not. The dhcp server has lease scopes for this subnet.

thanks

Joseph

142
Views
0
Helpful
2
Replies
CreatePlease login to create content