Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VRRP stopped working after upgrading to v3.6.7F

Hi,

Does anyone have issue with version 3.6.7F and VRRP setting ? It will not let an "IPSec over TCP" client to make a connection to a Master that was a Standby device.

Just want to verify if anyone else have the same issue.

Regards,

Engel

2 REPLIES
New Member

Re: VRRP stopped working after upgrading to v3.6.7F

Just taken a log from the client with IPSec over TCP enabled.

As you can see, there is no response from the Concentrator from port 10000. I think this is the evidence that the Concentrator doesn`t have a TCP/10000 opened.

1 20:40:18.515 05/12/03 Sev=Info/6 DIALER/0x63300002

Initiating connection.

2 20:40:19.216 05/12/03 Sev=Info/6 IPSEC/0x6370001F

TCP SYN sent to 10.10.10.2, src port 2985, dst port 10000

3 20:40:24.223 05/12/03 Sev=Info/6 IPSEC/0x6370001F

TCP SYN sent to 10.10.10.2, src port 2985, dst port 10000

4 20:40:29.231 05/12/03 Sev=Info/6 IPSEC/0x6370001F

TCP SYN sent to 10.10.10.2, src port 2985, dst port 10000

5 20:40:34.238 05/12/03 Sev=Info/6 IPSEC/0x6370001F

TCP SYN sent to 10.10.10.2, src port 2985, dst port 10000

6 20:40:38.594 05/12/03 Sev=Warning/3 DIALER/0xE3300008

GI VPNStart callback failed "CM_CTCP_FAIL" (1Dh).

7 20:40:39.605 05/12/03 Sev=Info/6 IPSEC/0x63700022

TCP RST sent to 10.10.10.2, src port 2985, dst port 10000

8 20:40:39.605 05/12/03 Sev=Info/4 IPSEC/0x63700014

Deleted all keys

New Member

Re: VRRP stopped working after upgrading to v3.6.7F

Hi All,

Does anyone experience the same issue with VRRP+ IPSec over TCP using version 3.6.7F ?

118
Views
0
Helpful
2
Replies