Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Want to know amount of flash an old 515 pix firewall has.

I have two old 515 pix firewalls and would like to upgrade them with the earliest software version. Actually when I give a "sh ver" in each, I get this information, but I`m not sure how to read how much flash it has. Also if I need a flash upgrade, would like to have flash part number.

Thanks for your help!

This is information I receive:

FIRST PIX:

PIX Version 4.4(1)

Compiled on Tue 18-May-99 16:34 by pixbuild

PIX BIOS (4.0) #0: Tue May 18 16:29:54 PDT 1999

pixfirewall up 7 secs

Hardware: PIX-515, 64 MB RAM, CPU Pentium 200 MHz

Flash strata @ base 0x300

0: ethernet0: address is 0050.54ff.2d3e, irq 10

1: ethernet1: address is 0050.54ff.2d3f, irq 7

Licensed Options:

Failover: Enabled

IPSec: Disabled

Ports allowed: 6

SECOND PIX:

pixfirewall# sh ver

PIX Version 4.4(1)

Compiled on Tue 18-May-99 16:34 by pixbuild

PIX BIOS (4.0) #0: Tue May 18 16:29:54 PDT 1999

pixfirewall up 2 mins 27 secs

Hardware: PIX-515, 64 MB RAM, CPU Pentium 200 MHz

Flash strata @ base 0x300

0: ethernet0: address is 0050.54ff.2dd6, irq 10

1: ethernet1: address is 0050.54ff.2dd7, irq 7

2: ethernet2: address is 00d0.b7d4.1962, irq 11

Licensed Options:

Failover: Enabled

IPSec: Disabled

Ports allowed: 6

Serial Number: 480040508

pixfirewall# sh hard

PIX Version 4.4(1)

Compiled on Tue 18-May-99 16:34 by pixbuild

PIX BIOS (4.0) #0: Tue May 18 16:29:54 PDT 1999

pixfirewall up 2 mins 30 secs

Hardware: PIX-515, 64 MB RAM, CPU Pentium 200 MHz

Flash strata @ base 0x300

0: ethernet0: address is 0050.54ff.2dd6, irq 10

1: ethernet1: address is 0050.54ff.2dd7, irq 7

2: ethernet2: address is 00d0.b7d4.1962, irq 11

Licensed Options:

Failover: Enabled

IPSec: Disabled

Ports allowed: 6

2 REPLIES
Silver

Re: Want to know amount of flash an old 515 pix firewall has.

Good news! The "strata" indicates that you have 16MB of flash and can upgrade your software to something from this decade!

New Member

Re: Want to know amount of flash an old 515 pix firewall has.

Thanks for your valuable help.

Have a good day.

98
Views
0
Helpful
2
Replies
CreatePlease to create content