We need to authenticate multiple users from a pix via a tacacs server,the problem is that PAT is being done on the router in front of the Pix. The result is that the authentication does not work correctly as the pix authenticates on session parameters, it
Refer to question : We have to authenticate multiple users for web access via the pix , the PAT on the router in front of the seems to bypass the authentication as only the first session is being authenticated. Will moving the PAT to he PIX itself solve this problem ? i.e. Will the pix then identify individual users and authenticate them before doing the PAT?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...