ip nat inside source list 1 interface FastEthernet4 overload
access-list 1 remark local
access-list 1 permit 126.96.36.199 0.0.0.255
access-list 100 permit ip 188.8.131.52 0.0.0.255 192.168.3.0 0.0.0.255
access-list 100 permit ip 184.108.40.206 0.0.0.255 192.168.4.0 0.0.0.255
The thing is that when I apply the local access list, lo let the 220.127.116.11 hosts access the internet, I can't reach the other end of the tunnel. ( Say ping to 192.168.3.35 ). When I disable the local access list : access-list 1 permit ip 18.104.22.168 0.0.0.255, the tunnel works. I can access the other end of the tunnel from any of the hosts at 22.214.171.124, but I don't have internet access. Can somebody explain what is happening and how to solve it ? Thank you.
Helps meet PCI* compliance.
Threat protection built into ISR and ISRv branch routers and CSR
Complements ISR Integrated Security
Lightweight IPS solution with low TCO (Total Cost of Ownership) and automated signature updates
Supports VRF (16.6)
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...