ip nat inside source list 1 interface FastEthernet4 overload
access-list 1 remark local
access-list 1 permit 18.104.22.168 0.0.0.255
access-list 100 permit ip 22.214.171.124 0.0.0.255 192.168.3.0 0.0.0.255
access-list 100 permit ip 126.96.36.199 0.0.0.255 192.168.4.0 0.0.0.255
The thing is that when I apply the local access list, lo let the 188.8.131.52 hosts access the internet, I can't reach the other end of the tunnel. ( Say ping to 192.168.3.35 ). When I disable the local access list : access-list 1 permit ip 184.108.40.206 0.0.0.255, the tunnel works. I can access the other end of the tunnel from any of the hosts at 220.127.116.11, but I don't have internet access. Can somebody explain what is happening and how to solve it ? Thank you.
Show Name: Thoughts on Security at Cisco Live US 2018 in Orlando
Contributors: Kevin Klous, David White Jr., Aaron Woland, Jeff Fanelli
Posting Date: June 2018
Description: The team goes on-site in the Cisco Live Speaker room in...
RADIUS and Symantec VIP.
I will use screenshots of ASDM, and at the end I will add the required CLI commands. the diagram below show a diagram of the steps the FW goes through when using 2FA authentication:
As you can see in Fig. 1&nbs...