Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WEP to WPA

How to we go about migrating from WEP to WPA on AP?

  • Other Security Subjects
5 REPLIES

Re: WEP to WPA

If you want to use just one vlan, then you would need to set under your SSID:

authentication open

authentication key-management wpa

wpa ascii key

Under your radio interface:

int do0

encryption vlan 1 mode ciphers tkip

HTH,

John

HTH, John *** Please rate all useful posts ***
New Member

Re: WEP to WPA

i ve one vlan defined for wireless.

i think we need to change profile settings on the user end.shouldn't we?

Re: WEP to WPA

Yes. When the clients "switch over", they're going to lose association with the AP. You'll have to change the encryption type under the client from wep to wpa-psk (if windows).

HTH,

John

HTH, John *** Please rate all useful posts ***
New Member

Re: WEP to WPA

how do we accomplish this through SMS. through scripts?

Re: WEP to WPA

You may be able to do that, or through GPO, but I'm not a big Microsoft guy. You'll probably want to contact them to see if there's a way to do this through scripting of some kind. Otherwise, you'll need to send a message out to all of your users describing how to switch over to the new security method.

HTH,

John

HTH, John *** Please rate all useful posts ***
135
Views
0
Helpful
5
Replies
This widget could not be displayed.