What Equipment is needed for Multi Office & Remote User VPN
We are trying to set up a VPN between 4 Offices and some home users. We have a PIX515R that we can use.
What Else do I need. Our main focus is to keep each of the sites secure (as they are connected via the internet, and to only allow the remote offices and home office users access to the Corporate information.
All of the Corp info is located in One Office, Most of the other offices are sales offices which only access the data at the Corp Office. The Sales Offices have at most 10 people in them. One of the remte offices relies heavilly on Internt content. Most of the Offices are connected to the Internet via DSL, we were thinking of going to Frame to get better upload connection speeds.
I've been told to use the PIX with VPN Concentrators, or the VPN enabled routers.
Re: What Equipment is needed for Multi Office & Remote User VPN
The 515 is a good start at corporate. I would still put a 3000 series concentrator in there to terminate the remote sites and mobile users VPNs. At the remote offices, if you dont have a firewall solution, put some small PIXs in there and run your VPN from those to the Concentrator or get some small routers (1700 series perhaps?) and run IOS Firewall and IPSEC on that. There are a lot of options and its hard to make an exact recommendation without seeing your site.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...