What Network Segment will the Altiga CLient consider Secure
Hello: Does the Altiga client 2.5.2 consider all network traffic as being terminated at the outside interface of the cisco 3015? we have 100+ cisco routers which all run RFC1918 addressing. Most use 192.168.1.0 for their private network. Clients on those routers are trying to get to our financial machines across the WAN. Our segment is also on private address space using 192.168.1.0. We have a pix box, cisco 3015, and inside router which serves as the default gateway with a static route to the pix at 192.168.1.254.
The 3015 is sitting in parallel with the PIX with an outside interface which is public and an inside interface on the 192.168.1.0 segment. If the 3015 has a pool of addresses 172.16.254.1-172.16.254.154 to hand off to the clients which attach to the 3015 what address do the clients try to get to from their end. If our financial machine is on 192.168.1.4 at our end do they try to get to that address? even if they are on an inside address space which is 192.168.1.0. Their own address might be 192.168.1.4 for all we know. We can't seem to get the client to ping anywhere, even their own gateway, once the client has authenticated.
Then I guess the next question is how does the client running the Altiga software get to his own network. Does he have to disconnect from the tunnel?
DocumentationCode download linksGoalRequirementLimitationsSupported ISR
and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and
UCS-E Blades:Step by Step ConfigurationConfigure one of the connectivity
options to access the Cisco IMC from the n...
Firepower Threat Defense (NGFWv) on UCS E-series - Transparent Mode in
HA DocumentationCode download linksGoalRequirementLimitationsSupported
ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and
UCS-E Blades:Step by Step ConfigurationCo...
Question I am currently unable to specify "crypto keyring" command when
configuring VPN connection on my cisco 2901 router. The following
licenses have been activated on my router :