Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

which are the ports that the ACS v3.0 on Windows2000/NT Server opens?

Does anyboby know which are the ports that the ACS v3.0 on Windows2000/NT Server opens? This is because I have to open an access on a Firewall for people connecting to the ACS to manage it by browser.

3 REPLIES
New Member

Re: which are the ports that the ACS v3.0 on Windows2000/NT Serv

hi,

As you can see when connecting to the ACS console the used port is assigned dynamically. In fact, you launch your connection using a specific port, but this one is chnaged dynamically. I don't now if there is a way to put it to a fixed value...

Regards,

Marc Halleux.

Cisco Employee

Re: which are the ports that the ACS v3.0 on Windows2000/NT Serv

Initial port to login to ACS NT is 2002 but after that ACS generates random ports. Now you can configure the ACS to generate those port numbers from a pool of a port or a single port all the time for administrator..Based on that you can open those ports on PIX.

That config is under "Administraction Control" tab click on "access policy" and go down and look for "Restrict Adminsitation Sessions to the following port range From Port"..By default the port range is from 1024 to 65535. But you can limit it to one or a range..Hope this helps..Thx..Tejal

New Member

Re: which are the ports that the ACS v3.0 on Windows2000/NT Serv

Thanks a lot, I found this option in the ACS Server and I 've just configured. So my doubt has been solved.

77
Views
0
Helpful
3
Replies