Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

why my pix535 only support 3 static outside ?

On the other side of pix 535 outside interface ,the router`s interface ethernet

,with the "show arp "command,i only find three pix 535 static ip address with

pix535's outside interface mac address,but have other static ip address no assign a mac, there only 00-00-00-00 display,why?

thanks!

3 REPLIES
Silver

Re: why my pix535 only support 3 static outside ?

If there had been no recent communication to those ip addresses, there may not be an arp entry as it may have timed out. if you ping those static ip addresses, and they are in use, they should appear in the arp table

Silver

Re: why my pix535 only support 3 static outside ?

Hi,

This is kind of strange ! With proxy arp on, you should be able to see the mac of outside for all the static translations. I would check to see if there is any address conflictions? Thanks,

Mynul

New Member

Re: why my pix535 only support 3 static outside ?

Hi,thanks everybody,i found my static command config wrong,

now system is ok.

thanks!

90
Views
0
Helpful
3
Replies
CreatePlease to create content